17 research outputs found
5G Millimeter Wave Cellular System Capacity with Fully Digital Beamforming
Due to heavy reliance of millimeter-wave (mmWave) wireless systems on
directional links, Beamforming (BF) with high-dimensional arrays is essential
for cellular systems in these frequencies. How to perform the array processing
in a power efficient manner is a fundamental challenge. Analog and hybrid BF
require fewer analog-to-digital converters (ADCs), but can only communicate in
a small number of directions at a time,limiting directional search, spatial
multiplexing and control signaling. Digital BF enables flexible spatial
processing, but must be operated at a low quantization resolution to stay
within reasonable power levels. This paper presents a simple additive white
Gaussian noise (AWGN) model to assess the effect of low resolution quantization
of cellular system capacity. Simulations with this model reveal that at
moderate resolutions (3-4 bits per ADC), there is negligible loss in downlink
cellular capacity from quantization. In essence, the low-resolution ADCs limit
the high SNR, where cellular systems typically do not operate. The findings
suggest that low-resolution fully digital BF architectures can be power
efficient, offer greatly enhanced control plane functionality and comparable
data plane performance to analog BF.Comment: To appear in the Proceedings of the 51st Asilomar Conference on
Signals, Systems, and Computers, 201
Frame Structure Design and Analysis for Millimeter Wave Cellular Systems
The millimeter-wave (mmWave) frequencies have attracted considerable
attention for fifth generation (5G) cellular communication as they offer orders
of magnitude greater bandwidth than current cellular systems. However, the
medium access control (MAC) layer may need to be significantly redesigned to
support the highly directional transmissions, ultra-low latencies and high peak
rates expected in mmWave communication. To address these challenges, we present
a novel mmWave MAC layer frame structure with a number of enhancements
including flexible, highly granular transmission times, dynamic control signal
locations, extended messaging and ability to efficiently multiplex directional
control signals. Analytic formulae are derived for the utilization and control
overhead as a function of control periodicity, number of users, traffic
statistics, signal-to-noise ratio and antenna gains. Importantly, the analysis
can incorporate various front-end MIMO capability assumptions -- a critical
feature of mmWave. Under realistic system and traffic assumptions, the analysis
reveals that the proposed flexible frame structure design offers significant
benefits over designs with fixed frame structures similar to current 4G
long-term evolution (LTE). It is also shown that fully digital beamforming
architectures offer significantly lower overhead compared to analog and hybrid
beamforming under equivalent power budgets.Comment: Submitted to IEEE Transactions for Wireless Communication
Achieving Ultra-Low Latency in 5G Millimeter Wave Cellular Networks
The IMT 2020 requirements of 20 Gbps peak data rate and 1 millisecond latency
present significant engineering challenges for the design of 5G cellular
systems. Use of the millimeter wave (mmWave) bands above 10 GHz --- where vast
quantities of spectrum are available --- is a promising 5G candidate that may
be able to rise to the occasion.
However, while the mmWave bands can support massive peak data rates,
delivering these data rates on end-to-end service while maintaining reliability
and ultra-low latency performance will require rethinking all layers of the
protocol stack. This papers surveys some of the challenges and possible
solutions for delivering end-to-end, reliable, ultra-low latency services in
mmWave cellular systems in terms of the Medium Access Control (MAC) layer,
congestion control and core network architecture
End-to-End Simulation of 5G mmWave Networks
Due to its potential for multi-gigabit and low latency wireless links,
millimeter wave (mmWave) technology is expected to play a central role in 5th
generation cellular systems. While there has been considerable progress in
understanding the mmWave physical layer, innovations will be required at all
layers of the protocol stack, in both the access and the core network.
Discrete-event network simulation is essential for end-to-end, cross-layer
research and development. This paper provides a tutorial on a recently
developed full-stack mmWave module integrated into the widely used open-source
ns--3 simulator. The module includes a number of detailed statistical channel
models as well as the ability to incorporate real measurements or ray-tracing
data. The Physical (PHY) and Medium Access Control (MAC) layers are modular and
highly customizable, making it easy to integrate algorithms or compare
Orthogonal Frequency Division Multiplexing (OFDM) numerologies, for example.
The module is interfaced with the core network of the ns--3 Long Term Evolution
(LTE) module for full-stack simulations of end-to-end connectivity, and
advanced architectural features, such as dual-connectivity, are also available.
To facilitate the understanding of the module, and verify its correct
functioning, we provide several examples that show the performance of the
custom mmWave stack as well as custom congestion control algorithms designed
specifically for efficient utilization of the mmWave channel.Comment: 25 pages, 16 figures, submitted to IEEE Communications Surveys and
Tutorials (revised Jan. 2018
Capacity Bounds for Communication Systems with Quantization and Spectral Constraints
Low-resolution digital-to-analog and analog-to-digital converters (DACs and
ADCs) have attracted considerable attention in efforts to reduce power
consumption in millimeter wave (mmWave) and massive MIMO systems. This paper
presents an information-theoretic analysis with capacity bounds for classes of
linear transceivers with quantization. The transmitter modulates symbols via a
unitary transform followed by a DAC and the receiver employs an ADC followed by
the inverse unitary transform. If the unitary transform is set to an FFT
matrix, the model naturally captures filtering and spectral constraints which
are essential to model in any practical transceiver. In particular, this model
allows studying the impact of quantization on out-of-band emission constraints.
In the limit of a large random unitary transform, it is shown that the effect
of quantization can be precisely described via an additive Gaussian noise
model. This model in turn leads to simple and intuitive expressions for the
power spectrum of the transmitted signal and a lower bound to the capacity with
quantization. Comparison with non-quantized capacity and a capacity upper bound
that does not make linearity assumptions suggests that while low resolution
quantization has minimal impact on the achievable rate at typical parameters in
5G systems today, satisfying out-of-band emissions are potentially much more of
a challenge.Comment: Appears in the Proceedings of IEEE International Symposium on
Information Theory (ISIT) 202